HD-70 Silane
H2C=C(CH3)CO2(CH2)3Si(OCH3)3
Introduction
HD-70 is a methacry1-functional silane, it is a clear, light and heat sensitive liquid with a faintly sweet odour.
HD-70 is used as adhesion promoter at organic interfaces, as surface modifier (e.g. imparting water repellency, organophilic surface adjustment or as crosslinking of polymers). It is used as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture. It is typically employed as a blend additive in resin systems that cure via a free radical mechanism (e.g. polyester, acrylic) and in filled or reinforced thermoplastic polymers, including polyolefins and polyurethanes. It is also used to functionalize resins via radical initiated processes – copolymerization or grafting – and to modify surfaces.
Typical Physical Properties
_____________________________________________________________
Chemical Name gamma-Methacryloxypropyltrimethoxysila
Empirical Formula C10H20O5Si
Molecular Weight 248.4
Color and Appearance Colorless transparent liquid
Density 25/25℃ 1.045
Boiling Point 255℃ 【760mmHg】
Refractive Index 1.4202+/-0.0005 【25℃】
Viscosity 25℃ 2 cSt
Flash Point 108℃
CAS No. 2530-85-0
EINECS No. 219-785-8
Min. Purity 96.0%
_____________________________________________________________
Solubility
HD-70 is soluble in methanol, ethanol, isopropano1, acetone, benzene,
toluene, and xylene. After hydrolysis, it is soluble in water with adequate
stirring if the pH is adjusted to 4.0. Hydrolysis releases methanol.
HD-70 shows copolymerization or grafting reactions when catalyzed by
(organic) initiator systems, e.g. peroxides or by radiation (e.g. UV).
Applications
● Improves strength as glass fiber size composite in reinforced polyester composites.
● Enhances initial and wet strength of reinforced polyester resin composites.
● Enhances the wet electrical properties of many mineral filled and reinforced composites.
● Crosslinks acrylic type resins improving adhesion and durability of adhesives and coatings.
